YSI DIQ/S 182 XT-4 System 182 XT-4 - Manual (Page 55)

System 182 XT-4 Installation
3 - 41 ba76026e01 01/2012
Fig. 3-28 Prepared 24 V AC/DC line.
Connecting the 24 V AC/
DC line
Fig. 3-29 Inserting the 24V AC/DC line
4 Open the enclosure of the DIQ/S 182 XT-4 (front terminal
strip).
5 Screw a cable gland (pos. 1 in Fig. 3-29) with sealing ring (pos.
2) into the enclosure below the 24 V AC/DC connection.
6 Loosen the coupling ring (pos. 3).
7 Feed the 24 V AC/DC line through the cable gland into the
enclosure. When doing so bend the flexible divider (pos. 4) to
the right.
1
3
2
4