YSI DIQ/S 182 XT-4 System 182 XT-4 - Manual (Page 113)

System 182 XT-4 Outputs
6 - 21 ba76026e01 01/2012
6.4.7 Sensor controlled
With the Sensor controlled function, the relay is controlled by a linked
sensor.
Requirement Sensor that transmits signals to trigger a cleaning cycle, e.g. UV/VIS
sensor
Settings
Note
Settings of the cleaning process can be done in the SETTINGS menu
of the respective sensor.
Setting Selection/Values Explanation
Pulse length Automatic The duration of the air
cleaning process is
programmed in the
sensor.
The relay automati-
cally takes over the
cleaning duration
from the sensor.
0,5 s
1 s
2 s
3 s The relay finishes the
cleaning after the
selected interval.