YSI DIQ/S 182 XT-4 System 182 XT-4 - Manual (Page 93)

System 182 XT-4 Outputs
6 - 1 ba76026e01 01/2012
6 Outputs
6.1 Outputs of the system 182 XT-4
The DIQ/S 182 XT-4 has six relay outputs and five current outputs. The
outputs are spread over the two terminal strips as follows (Rx = relay
output, Cy = current output):
Allocation of the outputs
Note
The terminal strips are shown in section 3.14.
Functions for relay
outputs
 System monitoring
 Sensor monitoring
 Limit indicator
 Frequency output
 Pulse-width output

Sensor controlled
 Cleaning
 Manual control
Relay outputs can be configured as openers or closers.
Name in the menu
SETTINGS Front terminal
strip Rear terminal
strip
DIQ/S182 XT-4 R1 R1
DIQ/S182 XT-4 R2 R2
DIQ/S182 XT-4 R3 R3
DIQ/S182 XT-4 C1 REC C1
DIQ/S182 XT-4 C2 REC C2
DIQ/CR3 R1 R1
DIQ/CR3 R2 R2
DIQ/CR3 R3 R3
DIQ/CR3 C1 REC C1
DIQ/CR3 C2 REC C2
DIQ/CR3 C3 REC C3