YSI MultiLab 4010P-1 - Manual (Page 16)

Operation MultiLab 4010-1
16 ba76141e03 03/2014
4 Operation
4.1 General operating principles
4.1.1 Keypad
In this operating manual, keys are indicated by brackets <..>.
The key symbol (e.g. <MENU/ENTER>) generally indicates a short keystroke
(press and release) in this operating manual. A long keystroke (press and hold
for approx. 2 sec) is indicated by the underscore behind the key symbol (e.g.
<MENU/ENTER__>).
<F1>:
<F1__>:
<F2>:
<F2__>: Softkeys providing situation dependent functions, e.g.:
<F1>/[Info]: View information on a sensor
<On/Off>: Switches the meter on or off
<M>: Selects the measured parameter / Quits the settings
<CAL>:
<CAL__>: Calls up the calibration procedure
Displays the calibration data
<STO>:
<STO__>: Saves a measured value manually
Opens the menu for the automatic save function
<RCL>:
<RCL__>: Displays the manually stored measured values
Displays the automatically stored measured values
<><>:
<__><__>:
Menu control, navigation
Increments, decrements values
Increments, decrements values continuously
<MENU/ENTER>:
<MENU/ENTER__>: Opens the menu for measurement settings / confirms
entries
Opens the menu for system settings
<AR> Freezes the measured value (HOLD function)
Switches the AutoRead measurement on or off
F1
F2
STO STO
RCL
AR AR