YSI MultiLab 4010P-1 - Manual (Page 91)

MultiLab 4010-1 What to do if...
ba76141e03 03/2014 91
Display
Instrument does not
react to keystroke
You want to know
which software
version is in the
meter or IDS sensor
Cause Remedy
– Batteries almost empty – Replace the batteries (see section
13.1 M
AINTENANCE
, page 86)
Cause Remedy
– Operating condition undefined
or EMC load unallowed
– Processor reset:
Press the <ENTER> and <On/Off>
key simultaneously
Cause Remedy
– E. g., a question by the service
department
– Switch on the meter.
– Open the menu, <ENTER__> / Stor-
age & config / System / Service infor-
mation. The instrument data are
displayed.
or
– Connect the sensor.
Press softkey [<F1>Info<F1>] /
[More] The sensor data are displayed
(see section 4.1.5 S
ENSOR INFO , page
18)