YSI MultiLab 4010P-1 - Manual (Page 80)

Transmitting data (USB interfaces) MultiLab 4010-1
80 ba76141e03 03/2014
11.4 Options for data transmission to a PC
Via the USB-B interface you can transmit data to a PC. The following table
shows which data are transmitted to the interface in which way:
11.5 MultiLab Importer
With the aid of the MultiLab Importer software, you can record and evaluate
measuring data with a PC.
Data Control Operation / description
Current
measured val-
ues of all con-
nected
sensors manual  With <F2>/[USB output].
 Simultaneously with every manual
storage process (see section 10.1
M
ANUAL DATA STORAGE , page 73).
automatic, at
intervals  With <F2__>/[USB output].
Then you can set the transmission
interval.
 Simultaneously with every auto-
matic storage process (see section
10.2 A
UTOMATIC DATA STORAGE AT
INTERVALS , page 74).
Stored mea-
sured values manual  Displayed dataset with <F2>[USB
output] after calling up from the data
storage.
 All datasets with the Output to
RS232/USB function.
(see section 10.3.1 E
DITING THE
MEASURED VALUE DATA STORAGE ,
page 76).
Calibration
records manual  Calibration record with <F2>/[USB
output] (see section 5.2.6 C
ALIBRA -
TION DATA
, page 37; section 7.2.6
C
ALIBRATION DATA
, page 51; section
8.3.4 C ALIBRATION DATA , page 57).
automatic  At the end of a calibration proce-
dure.
The following rule applies: With the exception of the menus, shortly
pressing the <F2>/[USB output] key generally outputs the display
contents to the interface (displayed measured values, measuring
datasets, calibration records).
More detailed information can be found in the MultiLab Importer
operating manual.