YSI MultiLab 4010P-1 - Manual (Page 23)

MultiLab 4010-1 Operation
ba76141e03 03/2014 23
 Settings
Settings are indicated by a colon. The current setting is displayed on the
right-hand side. The setting mode is opened with <MENU/ENTER>. Subse-
quently, the setting can be changed with <><> and <MENU/ENTER>.
Example:
 Functions
Functions are designated by the name of the function. They are immediately
carried out by confirming with <MENU/ENTER>. Example: Display the Cal-
ibration record function.
 Messages
Information is marked by the [
i ] symbol. It cannot be selected. Example:
General
Interface
Clock function
Service information
Reset
System
03.04.2013
08:00
Back
Language: English
Audio signal: off
Illumination: on
Contrast: 12
Shutoff time: 1 h
Temperature unit: °C
Stability control : on
General
03.04.2013
08:00
Back
Calibration record
Calibration data storage
Buffer:
YSI
Single-point calibration: yes
Calibration interval: 7 d
Unit for slope: mV/pH
[ i ] 4.00 7.00 10.00
pH
03.04.2013
08:00
Back