YSI MultiLab 4010P-1 - Manual (Page 75)

MultiLab 4010-1 Data storage
ba76141e03 03/2014 75
Starting the
automatic data
storage function
To start the automatic data storage function, select continue with <><> and
confirm with <MENU/ENTER>. The meter switches to the measured value dis-
play.
The active automatic data storage function can be recognized by the progress
bar in the status line. The progress bar indicates the remaining storage dura-
tion.
Terminating the
automatic data
storage function
prematurely
Proceed as follows to switch off the automatic data storage function before the
adjusted storage duration has expired:
1 Remaining storage duration
2 Graphical display of the storage duration
If the automatic data storage function is activated, only the follow-
ing keys are active: <M>, <STO__> and <On/Off>. The other keys
and the automatic switch-off function are deactivated.
25.0
7.007
pH
°C
0 14
0d03h00min
1
2
03.04.2013
08:00
1. Press the <STO__> key.
The following window appears.
2. Using <><>, select yes and confirm with <MENU/ENTER>.
The meter switches to the measured value display.
The automatic data storage function is terminated.
Stop automatic storage?
yes
no
Warning
03.04.2013
08:00