YSI MultiLab 4010P-1 User Manual
Page 21
MultiLab 4010-1
Operation
ba76141e03
03/2014
21
Changing the
password
If the administrator has set up the access with password protection:
Forgotten the
password?
Contact the administrator.
The login is done immediately if no password is required. If a
sensor is connected the measured value display appears.
4.
If a password is required:
Using <><>, select the menu item, Password and confirm with
<MENU/ENTER>.
The user specifies the password when he or she first logs in with a
user name.
A valid password consists of 4 digits.
The user can change the password with the next login.
5.
Change the digit of the highlighted position with <><>.
Go to the next digit of the password with <F2>/[].
When the password was completely entered, confirm with <MENU/
ENTER>.
The login takes place. If a sensor is connected the measured value dis-
play appears.
1.
Switch the meter on with <On/Off>.
The Login dialog appears.
2.
Using <><>, select the menu item, User name and confirm with
<MENU/ENTER>.
The user name is highlighted.
3.
Using <><>, select a user name and confirm with <MENU/ENTER>.
4.
Using <><>, select the menu item, Change password and confirm
with <MENU/ENTER>.
5.
In the Password field, enter the old password with <><> and <F2>/
[]and confirm it with <MENU/ENTER>.
6.
In the New password field, enter the new password with <><> and
<F2>/[]and confirm it with <MENU/ENTER>.
The password is changed.
The login takes place. If a sensor is connected the measured value dis-
play appears.