YSI MultiLab 4010P-1 - Manual (Page 24)

Operation MultiLab 4010-1
24 ba76141e03 03/2014
4.5.4 Example 1 on navigation: Setting the language
1. Press the <On/Off> key.
The measured value display appears.
The instrument is in the measuring mode.
2. Using <MENU/ENTER__>, open the Storage & config menu.
The instrument is in the setting mode.
3. Select the System submenu with <><>.
The current selection is displayed with a frame.
4. Open the System submenu with <MENU/ENTER>.
Calibration record
Calibration data storage
Buffer:
YSI
Single-point calibration: yes
Calibration interval: 7 d
Unit for slope: mV/pH
[ i ] 4.00 7.00 10.00
pH
03.04.2013
08:00
Back
25.0
7.007
pH
°C
0 14
01.02.2014
08:00
Info USB output
System
Data storage
Storage & config
03.04.2013
08:00
Back