YSI MultiLab 4010P-1 - Manual (Page 51)

MultiLab 4010-1 Dissolved oxygen
ba76141e03 03/2014 51
7.2.6 Calibration data
Displaying the
calibration record
The calibration record of the last calibration is to be found under the menu item,
Calibration / Calibration record. To open it in the measured value display, press
the <CAL__> key.
The calibration records of the last 10 calibrations are to be found in the menu,
Calibration/Calibration data storage / Display. To open the Calibration menu,
press the <MENU/ENTER> key in the measured value display.
9. Wait for the AutoRead measurement to be completed (audio signal).

When calibrating in water vapor-saturated air (Cal):
The calibration record is displayed and output to the interface.
 When calibrating via comparison measurement (Comp):
Set the concentration value with <> <> and accept it with
<ENTER>.
The calibration record is displayed and output to the interface.
10. Switch to the measured value display with <MENU/ENTER>.
The calibration record is automatically transmitted to the interface
after calibrating.
O
2
DO Adjust
7.92
mg/l
Comp
03.04.2013
08:00


760 mmHg 25.1 °C