YSI MultiLab 4010P-1 - Manual (Page 74)

Data storage MultiLab 4010-1
74 ba76141e03 03/2014
10.2 Automatic data storage at intervals
The data storage interval (Interval) determines the time interval between auto-
matic data storage processes. Each data storage process transmits the current
dataset to the USB interface.
Configuring the
automatic data
storage function
Settings You can configure the automatic data storage function with the following set-
tings:
1. Press the <STO__> key.
The menu for automatic data storage appears.
1 Adjusted entire data storage duration
2 Max. available data storage duration
3 Graphical display of the data storage usage
ID number 1
Interval 30 s
Duration 180 min
continue
0d03h00min
0 1d17h33min
Automatic data storage
1
2
3
03.04.2013
08:00
Back
Menu item Possible setting Description
ID number 1 ... 10000 ID number for the dataset series.
Interval 1 s, 5 s, 10 s,
30 s, 1 min,
5 min, 10 min,
15 min, 30 min,
60 min Storage interval.
The lower limit of the storage interval
can be restricted by the number of free
storage locations.
The upper limit is restricted by the stor-
age duration.
Duration 1 min ... x min Storage duration.
Specifies after which time the auto-
matic data storage should be termi-
nated.
The lower limit of the storage duration
is restricted by the storage interval.
The upper limit is restricted by the
number of free storage locations.