2 connecting the power pack, 3 mounting the stand, Connecting the power pack – Xylem inoLab 7310_7310P WASTEWATER pH METER User Manual
Page 12: Mounting the stand
Advertising
Commissioning
pH 7310
12
ba75929e03
12/2011
3.3.2
Connecting the power pack
3.3.3
Mounting the stand
The stand base can be mounted at the right side of the meter.
CAUTION
The line voltage at the operating site must lie within the input
voltage range of the original power pack (see section
CAUTION
Use original power packs only (see section
page 62).
1.
Connect the plug of the power pack to the socket for the power pack on
the pH 7310.
2.
Connect the original power pack to an easily accessible power outlet.
1
2
Advertising