Xylem inoLab 7310_7310P WASTEWATER pH METER - Manual (Page 19)

pH 7310 Operation
ba75929e03 12/2011 19
2. Using <F1_>/[Menu], open the Storage & config menu.
The instrument is in the setting mode.
3. Select the System submenu with <><>.
The current selection is displayed with a frame.
4. Open the System submenu with <ENTER>.
5. Select the General submenu with <><>.
The current selection is displayed with a frame.
6. Open the General submenu with <ENTER>.
pH
6.949
25.0
°C
01.07.2011
08:00
Menu USB output
System
Data storage
Storage & config
01.07.2011
08:00
Back
General
Interface
Clock
Service information
Reset
System
01.07.2011
08:00
Back