Xylem inoLab 7310_7310P WASTEWATER pH METER - Manual (Page 46)

Data storage pH 7310
46 ba75929e03 12/2011
8 Data storage
You can transmit measured values (datasets) to the data storage:

Manual storage (see section 8.1 M ANUAL STORAGE , page 46)
 Automatic storage at intervals (see section 8.2 A UTOMATIC STORAGE AT
INTERVALS , page 47)
Each storage process transmits the current dataset to the interface at the same
time.
8.1 Manual storage
You can transmit a measurement dataset to the data storage as follows. The
dataset is at the same time output to the interface:
If the storage is full The following window appears if all 500 storage locations are occupied:
1. Press the <STO> key shortly.
The menu for manual storage appears.
2. If necessary, change and confirm the ID number (1 ... 10000) with
<
><> and <ENTER>.
The dataset is stored. The meter switches to the measured value dis-
play.
01.07.2011 11:24:16
pH 7.000 24.8 °C AR +++
ID number: 1
Continue
Manual data storage 4 From 500
01.07.2011
08:00
Back
Data storage full. Erase?
Yes
No
Warning
01.07.2011
08:00
Back