10 printer (only ph 7310p), 1 commissioning / switching the printer on or off, Section 10 p – Xylem inoLab 7310_7310P WASTEWATER pH METER User Manual
Page 54: Rinter, Only, H 7310p)
Printer (only pH 7310P)
pH 7310
54
ba75929e03
12/2011
10
Printer (only pH 7310P)
10.1
Commissioning / switching the printer on or off
Switching on the
printer
Switching off the
printer
1 Operating LED
– Illuminated: Printer is switched on
– Flashing: Printer is switched off
2 Control panel with the keys <ON/FEED> and <OFF>
3 Lever to open the paper compartment
4 Lid of the paper compartment
2
1
3
4
1.
Connect the power pack to the pH 7310 P.
The LED lights up green. The printer is ready for operation.
or
If the printer was switched off (LED flashing):
Switch on the printer with <OFF>.
The LED lights up green. The printer is ready for operation.
If there is a USB connection (such as to a PC) the data are output
only to the PC.
1.
Switch off the printer with <OFF>.
The LED flashes. The printer is switched off.