Xylem inoLab 7310_7310P WASTEWATER pH METER - Manual (Page 13)

pH 7310 Operation
ba75929e03 12/2011 13
4 Operation
4.1 General operating principles
4.1.1 Keypad
In this operating manual, keys are indicated by brackets <..> .
The key symbol (e.g. <ENTER>) generally indicates a short keystroke (under
2 sec) in this operating manual. A long keystroke (approx. 2 sec) is indicated
by the underscore behind the key symbol (e.g. <ENTER_>).
<F1>
:
<F1_> :
<F2> :
<F2__> :
Softkeys providing situation dependent functions, e.g.:
<F1>
/[Menu]: Opens the menu for measurement settings
<F1_> /[Menu]: Opens the menu for system settings
<On/Off>
: Switches the meter on or off
<M> : Selects the measured parameter / Quits the settings
<CAL>
:
<CAL_>
:
Calls up the calibration procedure
Displays the calibration data
<STO> :
<STO_> :
Saves a measured value manually
Opens the menu for the automatic save function
<RCL> :
<RCL_>
:
Displays the manually stored measured values
Displays the automatically stored measured values
<
><>:
<
_><_>:
Menu control, navigation
Increments, decrements values
Increments, decrements values continuously
<ENTER> :
<ENTER_> :
Opens the menu for measurement settings / confirms
entries
Opens the menu for system settings
<AR> Freezes the measured value (HOLD function)
Switches the AutoRead measurement on or off
F1
F2
STO STO
RCL
AR AR