Xylem inoLab 7310_7310P WASTEWATER pH METER - Manual (Page 53)

pH 7310 Transmitting data (USB interface)
ba75929e03 12/2011 53
9.2 Connecting a PC
Connect the pH 7310 to the PC via the USB interface.
NOTE
When connecting an earthed PC/printer, measurements cannot be
performed in earthed media as the values would be incorrect.
The USB interface is not galvanically isolated.
Installation of the
USB driver on the
PC
System requirements of the PC for installation of the USB driver:

PC with Pentium processor or higher with at least one free USB connection
and CD-ROM drive
 Windows 2000, XP, Vista.
9.3 MultiLab Importer
With the aid of the MultiLab Importer software, you can record and evaluate
measuring data with a PC.
1. Insert the supplied installation CD in the CD drive of your PC.
2. Install the driver from the CD.
Follow the Windows installation instructions as necessary.
3. Connect the pH 7310 to the PC via the USB interface.
The meter is listed as a virtual COM interface among the connections in
the Windows instrument manager.
More detailed information can be found in the MultiLab Importer
operating manual.