Xylem MULTI 1970I PORTABLE MULTIPARAMETER METERS - Manual (Page 14)

Commissioning Multi 1970i
12
Connecting the plug-in
power supply unit
3.3 Initial commissioning
Perform the following activities:
z For mains operation and charging the battery: Connect the plug-in
power supply (see section 3.2 P OWER SUPPLY ).
z Set the date and time.
Setting the date and
time
1 Connect the plug (1) to the socket (2) of the measuring instru-
ment.
2 Connect the original WTW plug-in power supply (3) to an easily
accessible mains socket.
2
1
3
1 Press the <M> key and hold it down.
2 Press the <ON/OFF> key.
The display test appears briefly on the display.
3 Press the <RUN/ENTER> key repeatedly until the date flashes
on the display (Day.Month display indicator).