Xylem MULTI 1970I PORTABLE MULTIPARAMETER METERS - Manual (Page 60)

Operation Multi 1970i
58
4.9 Configuration
You can adapt the measuring instrument to your individual require-
ments. To do this, the following parameters can be changed (the status
on delivery is marked in bold):
Note
You can leave the configuration menu at any time with <M> . The pa-
rameters that have already been changed are stored.
Baudrate
Baud rate 1200, 2400, 4800, 9600
Air pressure display Current value in mbar
(no input possible)
Calibration
intervals – pH: 1 ... 7 ... 999 dInt 3
– O
2
1 ... 14 ... 999 dInt 4
– : 1 ... 180 ... 999 dInt 5
Date/time Any
1 Switch off the measuring instrument.
2 Press the <M> key and hold it down.
3 Press the <ON/OFF> key.
The display test appears briefly on the display. The measuring
instrument then switches automatically to the setting of the
baud rate.
4 Select the required baud rate with <
▲> <▼>.
5 Confirm with <RUN/ENTER>. CAL dISP appears on the dis-
play.
Store
RCL
Sal
mg/ l
ARng
O
TP
Oxi Cal AR
°
C
S
Year Ident
No. Day.Month
Tref25 Tref20
LoBat Lin nLF
Sal
pH
TEC
Auto
Time cm 1/
K / %
REL2
pH / mV
m cm S/
%
8 0 0
REL1
4 Baud