Xylem MULTI 1970I PORTABLE MULTIPARAMETER METERS - Manual (Page 46)

Operation Multi 1970i
44
4.7 Saving data
The portable Multi 1970i multiparameter measuring instrument has an
internal data storage. It can store up to 500 datasets.
A complete data record consists of:
z Number of the storage location
z Date/time
z Measured values of the connected and active sensors
z Temperature values of the connected and active sensors
z Temperature measuring procedure
z ID number
You can transmit measured values (data records) to the data storage
in two ways:
z Save manually
z Switch on AutoStore (Int 1), see page 46
4.7.1 Saving manually
You can transmit a measured value to the data storage as follows:
1 Press the <STO> key.
The current number (location number No.) of the next free stor-
age location appears under the current measured value on the
display.
2 Confirm with <RUN/ENTER>.
The display switches to entering the ID number.
Time
Cal
d 1
I
O
AR
cm 1/
4
Tref25
TP
ARng nLF
°
C
cm S/
Sal
RCL
%
S
%
m
mg/ l
Oxi
Year Ident
Day.Month
Tref20
LoBat Lin
Sal
TEC
Auto
Baud
K /
REL2
pH / mV
4
9 6 9
REL1
pH
No.
Store