Extron Electronics MPX Plus 866 A Rev. B - Manual (Page 101)

4-17 MPX Plus 866 A Media Presentation Matrix Switcher • SIS Programming and Control
PRELIMINAR
Y
Command ASCII command
(host to switcher)
Response
(switcher to host)
Additional
description
Names
Write preset name EX1)
,
X1!
NG
}
Nmg
X1)
,
X1!]
Example: E
1,Security 1NG
}
Nmg01,Security 1
] Name preset 1 “Security 1”.
Read preset name EX1) NG } X1!]
Example: E
2NG
}
Security 2
]
Write input name EX# , X1! NI } Nmi X# , X1!]
Example: E
9,Podium cam1NI
}
Nmi09,Podium cam
] Name input 9 “Podium cam”.
Read input name EX#
NI
} X1!]
Write output name EX@
,
X1!
NO
}
Nmo
X@
,
X1!]
Example: E
1,Main PJ1NO
}
Nmo01,Main PJ1
] Name output 1 “Main PJ1”.
Read output name EX@ NO } X1!]
Lock (executive) modes
N See “Setting the front panel locks ( Executive modes)” in chapter 3, “Operation”, for more information on Lock modes.
Lock all front panel functions 1X Exe1 ] Enable Lock mode 1.
Lock advanced front panel
functions 2X Exe2
] Enable Lock mode 2.
Unlock all front panel functions 0X Exe0
] Enable Lock mode 0.
View lock status X X%]
Resets
Reset presets and names E
ZG
}
Zpg
] Clear all presets and their
names.
Reset an individual preset EX1)
ZG
}
Zpg
X1)]
Clear preset
X1)
.
Reset RGB delays E ZD } Zpd ] Reset all RGB delays to
0.0 seconds.
Reset audio input levels E
ZA
}
Zpa
] Reset all audio input levels
(gain and attenuation) to 0 dB.
Reset audio output levels E
ZV
}
Zpv
] Reset all audio output
levels (volume) to 100%
(no attenuation).
Reset all mutes E
ZZ
}
Zpz
] Reset all video and audio
mutes.
Reset a group E
Z
X2)
GRPM
}
GrpmZ
X2)] Delete all members from
group
X2)
, reset parameters
and soft limits.
N See “Group masters“, in chapter 5, “Switcher Software“, for more information about audio group masters.
Reset flash E
ZFFF
]
Zpf
] Reset flash memory
(erase user-supplied files).
Reset whole switcher E
ZXXX
}
Zpx
] Clear all ties and presets,
resets all audio gains to 0 dB,
and resets the volume to 100%.
Absolute reset E
ZQQQ
}
Zpq
] Similar to Reset whole
switcher
, plus sets the IP
address to 192.168.254.254
and the subnet mask to
255.255.0.0.
Command/response table for basic SIS commands (continued)
N
X#
= Input number 01 – 14
X@
= Output number 01 – 12 for video 01 – 06 for audio
X%
= Lock mode 0 = mode 0 1 = mode 1 2 = mode 2
X1)
= Preset # 32 maximum (0 = current configuration)
X1!
= Name 12 characters maximum
X2)
= Group master group number 01 – 32