Input buttons, Output buttons, Input buttons -4 output buttons -4 – Extron Electronics MPX Plus 866 A Rev. B User Manual

Page 34: Preliminar y, Operation, cont’d

Advertising
background image

Operation, cont’d

MPX Plus 866 A Media Presentation Matrix Switcher • Operation

3-4

PRELIMINAR

Y

Input buttons

a

Computer video inputs 1 through 8 — Select and identify computer video

group inputs.

b

Low resolution video inputs 9 through 14 — Select and identify low

resolution video group inputs.

The input buttons have one primary function (•) and four secondary (❏)

functions:
• Select and identify an input.

N • Computer inputs 1 through 8 video can be tied only to outputs 1 through 6.

• Video inputs 9 through 14 video can be tied only to outputs 7 through 12.
• Audio can be tied only to outputs 1 through 6. If you make a video and audio

tie from the low resolution video group (inputs 9 through 14), audio is tied to
an output in the computer group (outputs 1 through 6).

• “Input selection” includes selecting Video inputs 11 through 14 for video

configuration (S-video or composite).

❏

Select a preset. See “Using presets” on page 3-28.

❏

Display the RGB delay. See “Setting RGB delay (computer video group

only)” on page 3-23.

N

Although the low resolution video input buttons display part of the RGB delay

value, the delay itself is applied only to ties within the computer video group.

❏

Display the output volume level. See “Viewing and adjusting the output

volume” on page 3-38.

❏

(Input 1 and Input 2) Toggle background illumination of the buttons on

and off. See “Background illumination” on page 3-45.

Output buttons

c

Computer/Audio outputs 1 through 6 — Select and identify computer video

group outputs.

d

Low resolution video outputs 7 through 12 — Select and identify low

resolution video group outputs.

The output buttons have one primary function (•) and four secondary (❏)

functions:
• Select and identify one or more output(s).

N

• Computer outputs 1 through 6 can accept a video tie only from inputs 1

through 8.

• Video outputs 7 through 12 video can accept a video tie only from inputs 9

through 14.

❏

Select a preset. See “Using presets” on page 3-28.

❏

Mute the output. See “Muting and unmuting video and/or audio

outputs” on page 3-31.

❏

(Output 7 and Output 8) select S-video or composite video for inputs 11

through 14. See “Selecting S-video composite or video” on page 3-26.

❏

Display the audio level of the selected input. See “Viewing and adjusting

the input audio level” on page 3-34.

Advertising