Creating or deleting a tie, Creating or deleting a tie -16, Preliminar y – Extron Electronics MPX Plus 866 A Rev. B User Manual
Page 180: Html operation, cont’d
HTML Operation, cont’d
MPX Plus 866 A Media Presentation Matrix Switcher • HTML Operation
6-16
PRELIMINAR
Y
Creating or deleting a tie
Make or break a tie as follows:
1
.
Click the Video Only, Audio Only, or Video & Audio button to select video,
audio, or both for switching (audio breakaway or audio follow). Each mouse
click on a button toggles the other two buttons off.
2
.
Move the mouse over the matrix of input and output selection buttons. Click
a button to
• Create a pending tie (if a tie does not exist) of the input and output
associated with that button
• Create pending untie (if a tie exists) of the input and output associated
with that button
A “P” (for pending) appears in the button.
N
If you lose track of the input and output associated with a specific button, let the
mouse rest over one of the tie buttons for a moment. A field pops up (as shown
on figure 6-12) that identifies the input and output for that button.
N
To tie an input to all outputs, click that input’s input number.
3
.
Click the Take button to make the configuration changes or the Cancel button
to abandon the configuration changes.