Extron Electronics MPX Plus 866 A Rev. B - Manual (Page 186)

HTML Operation, cont’d
MPX Plus 866 A Media Presentation Matrix Switcher • HTML Operation 6-22
PRELIMINAR
Y
Global Presets page
You can save global ties presets and recall global tie presets and partial presets from
the Global Presets page (figure 6-22). Access the Global Presets page by clicking the
Global Presets
link on the left of the Control page.
Set and View Ties
Refresh
Video & Audio Settings
Figure 6-22 — Global Presets page
Save a preset
N When presets are saved via the HTML page, only the audio and video ties are
stored; audio gain settings are not saved.
Save the current configuration (configuration 0) as a global ties preset as follows:
1. Click the Save Preset button.
2. Select the desired preset by clicking on one of the presets listed. To create a
new preset, click one of the [unassigned] buttons. Overwrite an existing preset
by clicking an already existing preset.
3. If desired, type over the current name in the box adjacent to the Save Preset
button.
N Preset names are limited to 12 upper and lower case alphanumeric characters
and the {space} _ : = and / characters.
N The following characters are invalid in preset names:
+ ~ , @ = ‘ [ ] { } < > ’ “ ; : | \ and ?.
If you do not rename an unassigned button, the matrix switcher automatically
names the preset as Preset {next available number}.
If you do not rename an existing preset when it is overwritten, the matrix
switcher retains the same name.
4. Click the Accept button.