Extron Electronics MPX Plus 866 A Rev. B - Manual (Page 15)

1-5 MPX Plus 866 A Media Presentation Matrix Switcher • Introduction
PRELIMINAR
Y
Features
Video features
Computer video group — The switcher inputs and outputs RGBHV (VGA),
RGBS, RGsB, RsGsBs, or Y, R-Y, B-Y video on 15-pin HD connectors.
Low resolution video group — The switcher inputs and outputs NTSC 3.58,
NTSC 4.43, PAL, or SECAM S-video and/or composite video.
Input Video format
9* Composite only
10 Composite only
11 S-video or composite, as selected
12 S-video or composite, as selected
13 S-video or composite, as selected
14 S-video or composite, as selected
* Input 9 is a genlock reference. All other low resolution inputs are synced
to input 9.
Output Video format
7 Composite only
8 Composite only
N For outputs 7 and 8, if the tied input is S-video, the switcher encodes it to composite.
If the tied input is composite video, the switcher passes it through unprocessed.
9 S-video only
10 S-video only
N For outputs 9 and 10, if the tied input is S-video, the switcher passes it through
unprocessed. If the tied input is composite video, the switcher decodes it to S-video.
11 S-video or composite
12 S-video or composite
N For outputs 11 and 12, the output is passed through in the same format (S-video
or composite) as the tied input.
Bandwidth —
Computer video group —
The switcher provides a minimum of 300 MHz (-3 dB)
video bandwidth, fully loaded.
Low resolution video group — The switcher provides a minimum of
150 MHz (-3 dB) video bandwidth, fully loaded.