Extron Electronics MPX Plus 866 A Rev. B - Manual (Page 162)

Switcher Software, cont’d
MPX Plus 866 A Media Presentation Matrix Switcher • Switcher Software 5-56
PRELIMINAR
Y
Ties as Crosspoints — Displays ties as a matrix of inputs and outputs (figure 5-35).
Ties that have been made are indicated as amber (video and audio), green
(video only), and red (audio only) boxes. Ties that will take effect when you
click on the Take button are indicated by +. Ties that will be broken when
you click on the Take button are indicated by –.
Figure 5-35 — Ties shown as crosspoints
Frequency read options (computer video inputs only) — Allows you to set the
input signal detection (DSVP) feature as follows:
• To never sample and display the sync or no sync status
(set this option to None)
• To automatically refresh the display
(set this option to Automatically every 10 seconds)
• To sample the sync and update the display whenever you make a
configuration change (set this option to On demand or by refresh).
Icons in I/O Boxes — Erases any numbers in the I/O boxes in the
Control Program window (figure 5-25). You can place icons in the
boxes.
Numbers in I/O Boxes — Erases any icons in the I/O boxes in the
Control Program window and fills each box with the associated
input or output number.
Catch FPC/other’s Changes — When checked, sets the switcher to report
all configuration and setting changes to the Remote RS-232 or Ethernet
connection that turned this selection on. These reports allow the Matrix
Switchers Control Program to track the changes that occur in the switcher’s
configuration and settings, whether commanded via the front panel, the
RS-232 port, or the Ethernet port.