Extron Electronics MPX Plus 866 A Rev. B - Manual (Page 141)

5-35 MPX Plus 866 A Media Presentation Matrix Switcher • Switcher Software
PRELIMINAR
Y
d . To move away from the highlighted block or set of sequential blocks,
press and hold the Shift
Shift
key, then use the arrow ( , , , or )
key to move the highlighting box away from the last-highlighted
element.
N If you do not perform step 3c, the last selected element will not remain
highlighted.
e . Release the Shift
Shift
key.
4 . To highlight another element or group of elements, repeat steps 1 through 3.
5 . To cut or copy , press the Ctrl-X
Ctrl X
or Ctrl-C
Ctrl C
key combination.
6 . To save a preset , press Alt
Alt
> T
T
> right arrow > down arrow >
Enter
Enter (figure 5-21).
The Save a Preset dialog box appears.
a
. As desired, Tab
Tab
to the Preset Number field and type a specific preset
number.
b . As desired, Tab
Tab
to the Preset Name field and type a preset name.
N Unless you enter a specific number and/or name, the DSP Configurator
program enters the next sequential unused preset number and the name “Preset
{number}.
c . Tab
Tab
to highlight the OK button and press the Enter
Enter
key.
Alt T Enter
Figure 5-21 — Saving a preset using keyboard navigation