Extron Electronics MPX Plus 866 A Rev. B - Manual (Page 167)

6-3 MPX Plus 866 A Media Presentation Matrix Switcher • HTML Operation
PRELIMINAR
Y
7 . The switcher checks several possibilities, in the following order, and then
responds accordingly:
a
. Does the address include a specific file name, such as 10.13.156.10/file_
name.html? If so, the switcher downloads that HTML page to the PC.
b . Is there a file in the switcher’s memory that is named “index.html”?
If so , the switcher downloads “index.html” as the default startup page.
c . If neither of the above conditions is true, the switcher downloads the
factory-installed default startup page to the PC, “nortxe_index.html”
(figure 6-2), also known as the System Status page.
Status Tab
System Status page
The System Status page (figure 6-2) provides an overall view of the status of the
matrix switcher, including the power supply status, the individual voltages, and
the temperature. The System Status page is the default page that the switcher
downloads to the PC when you connect to the switcher. Access the System Status
page from other pages by clicking the Status tab.
DSVP
Refresh
Figure 6-2 — System Status page