I/o controls, I/o controls -7, Preliminar y – Extron Electronics MPX Plus 866 A Rev. B User Manual
Page 37
3-7
MPX Plus 866 A Media Presentation Matrix Switcher • Operation
PRELIMINAR
Y
I/O controls
Primary functions
Action/
indication:
Select video.
Green when selected
Select audio.
Red when selected
VIDEO
AUDIO
Secondary functions
Action 1:
With Enter, select Lock mode 2 and/or toggle between mode 0 and mode 2.
Action 2:
Select Lock mode 1 and/or toggle between mode 2 and mode 1.
Action/
indication:
Select Video mode.
Blinks green.
Action:
Perform a system reset
Action/
indication:
Select Audio mode.
Blinks red.
i
Video button — The Video button has one primary function (•) and four
secondary (❏) functions:
• Selects and deselects video for a configuration that is being created or
viewed and lights to indicate the selection.
❏
With the Enter button and Audio button, selects between front panel
locks (Lock mode 2 and Lock mode 0). See “Setting the front panel locks
(Executive modes)” on page 3-44.
❏
With the Audio button, selects between front panel locks (Lock mode 2
and Lock mode 1). See “Setting the front panel locks (Executive modes)”
on page 3-44.
❏
With the Audio button, commands the front panel system reset. See
“Performing a system reset from the front panel” on page 3-46.
❏
Selects the Video mode, in which you can set the RGB delay and select
the input formats for inputs 11 through 14. See “Setting RGB delay
(computer video group only)” on page 3-23.
j
Audio button — The Audio button has one primary function (•) and four
secondary (❏) functions
• Selects and deselects audio for a configuration that is being created or
viewed and lights to indicate the selection.
❏
Selects the Audio mode, in which you can adjust the input audio level and
the output audio volume. See “Viewing and adjusting the input audio
level” on page 3-34 and “Viewing and adjusting the local output volume”
on page 3-38.
❏
With the Enter button and RGBHV/Video button, selects between front
panel locks (Lock mode 2 and Lock mode 0). See “Setting the front panel
locks (Executive modes)” on page 3-44.
❏
With the RGBHV/Video button, selects between front panel locks (Lock
mode 2 and Lock mode 1). See “Setting the front panel locks (Executive
❏
With the Video button, commands the front panel system reset.
See “Performing a system reset from the front panel” on page 3-46.