Preliminar y – Extron Electronics MPX Plus 866 A Rev. B User Manual
Page 51
3-21
MPX Plus 866 A Media Presentation Matrix Switcher • Operation
PRELIMINAR
Y
2
.
Select
View-only mode
: Press and release the View button. The View button
lights red.
3
.
Select video and audio for viewing
: If necessary, press and release the Video
button and the Audio button.
I / O
VIDEO
AUDIO
7
8
9 10 11 12
VIDEO OUTPUTS
1
2
3
4
5
6
COMPUTER/AUDIO OUTPUTS
Until you select an input, the buttons for all untied outputs light the appropriate color:
• Amber
if no inputs are tied
• Green
if no video inputs are tied (only audio is tied)
• Red
if no audio inputs are tied (only video is tied).
NOTE
Video Outputs buttons can only
light green when no input is tied
because audio cannot be tied to
the low resolution video outputs.
Press the Audio button
to toggle on and off.
The button lights red
when selected.
Press the Video button
to toggle on and off.
The button lights
green when selected.
4
.
Select an input
: Press and release the input 5 button.
1
2
3
4
5
6
COMPUTER INPUTS
1
2
3
4
5
6
7
8
COMPUTER/AUDIO OUTPUTS
The output buttons for outputs that are not tied to
Input 5 are either unlit or background illuminated.
NOTE
Video Outputs buttons not shown;
all are unlit or background illuminated.
The output buttons for outputs that are tied to Input 5
light the appropriate color:
• Amber
if video and audio are tied
• Green
if only video inputs are tied (no audio is tied)
• Red
if only audio inputs are tied (no video is tied).
Press and release the Input 5 button.
The button lights amber.
N
A set of ties can also be viewed by selecting a tied output. To demonstrate this,
note the number of a lit output button, and then press and release the output
button for an untied (unlit or background illumination) output. Observe that
all of the untied outputs light. Then press the output button that you noted
previously and observe that the selected output button, the tied input button
(input 5), and the output buttons light for all of the outputs that are tied to the
input.