eLine Technology PRO3 User Manual - Manual (Page 30)

30
Ｕｓｅｒ Ｍａｎｕａｌ
System Setup
PTZ Setting PTZ protocol, address code, channel copy function.
Network
Setting
Network Setting DHCP, IP address, reserve IP setting, port setting, multicast setting.
Sub-Stream
1. Record type: all, manual, schedule, motion, alarm;
2. Code stream type: VBR, CBR;
3. Definition: CIF, QCIF;
4. Image quality: 6 level (highest, higher, high, middle, low, lowest);
5. Frame rate: 2-25 fps adjustable;
6. Code rate: 100K, 256K, 512K, 768K, 1M (CIF); 45K, 60K, 90K, 128K, 256K (QCIF);
7. Audio: enable indicate audio is available when network transmission, otherwise
don’t have audio when network transmission.
DDNS Choose DDNS server, set user name and password for analysis, DDNS test.
PPPOE Set user name and password for PPPOE or 3G dial up.
Email Setting Set server, sender name, password, sender address, receiver address, port, Email test.
Platform Server Platform server reserved function.
Compound Channel Enable the compound channel and set the parameter.
Input Settings Inputting resolution, channel copy function.
HDD Management Basic Info. Display status and information of each HDD/USB/burner, format the HDD/log , try to use HDD and set attribution.
eLineTechnology.com