Ｕｓｅｒ ｍａｎｕａｌ – eLine Technology PRO3 User Manual User Manual
Page 56
56
Ｕｓｅｒ Ｍａｎｕａｌ
1. Network Setting
Enter into “Network” -> “Network”, the interface is the right figure above:
l DHCP: If there have DHCP server, you can select the “DHCP” option, DVR will obtain a dynamic IP address from the server and displayed within the IP address column.
l IP: This IP must be unique. It can’t conflict with the IP of other servers or working stations in the same LAN. Default: 192.168.0.6.
l DNS server: Please input the DNS server address which get from local network operator.
l Backup IP: The backup IP will work when the DHCP fails.
l Port Setting: Command Port, HTTP Port, Upgrade Port.
Command Port: The communication port with client. Default is 8101, value range is 8000~9000.
HTTP Port: Web browser access port. Default is 81.The access format is: http://IP:http port.
l Multicast Setting:
Enable multicast: This function only used on UDP stream.
Multiple IP address: Multiple IP address set range is from 224.0.0.0 to 239.255.255.255; The system default is 239.0.0.1.
Enter into “Main Menu” -> “System Setup” -> “Network”, the interface is as follows:
4.7.6 Network Setting
eLineTechnology.com