eLine Technology PRO3 User Manual - Manual (Page 43)

43
Ｎｅｔ ＤＶＲ
4.5.4 Manual Record
Manul Record interface is as follows:
l When enable manual record, the color of channel button is blue. Disable is gray color.
l If you open manual record, it will manual record all the time until you manual close it.
If the power supply was cut off, after it have power supply again, it will continue to manual record.
There has two way to open Manual Record.
Method 1: Press “Record” button in remote controller to enter setting interface, then choose the manual record channel.
Method 2: Enter “Main Menu” -> “Record Setup” -> “Manul Record” interface to set the setting.
Enter “Manu Menu” -> “Record Setup” -> “Manul Snapshot” interface as the right figure above:
l Enable manual snapshot, the channel button color is blue. Disable is gray color.
l If you open manual snapshot, it will manual snapshot all the time until you manual close it.
If the power supply was cut off, after it have power supply again, it will continue to manual snapshot.
Note: Please set the snapshot parameters before using manual record function.
4.5.5 Manual Snapshot
eLineTechnology.com