eLine Technology PRO3 User Manual - Manual (Page 68)

68
Ｕｓｅｒ Ｍａｎｕａｌ
1. User Management
l Add/delete user: Focus the cursor on the “Add” icon and click to add new user, move the cursor to select the user in the user list, then focus the cursor on the “Delete” icon and
click to delete the user.
l Modify password: Using the direction key of the remote controller to move the cursor to the user list, press “OK”, then you can get in the interface, or click the mouse to get in.
l Support local and remote rights setting.
4.10.3 Reset to Default
The way to restore default setting: After login, through “System Maintenance” -> “Reset to Default” continuous operations to enter the interface, the interface is as follows:
Note: Network IP and port, System time, user account and hard disk management wouldn’t be restore default when do this operation.
General: Enable auto-lock (enable), Auto lock (3 minutes); Open remote control lock (disable); Host id (1), Display power on wizzard (enable).
Output: Video area mask (disable); Special region (disable); Channel name position; Display time (enable); Date format (YYYY-MM-DD); Display channel name (Enable);
2. User Group
Support user group function: each user can just take part in one group, the admin user can distribute rights to users in this group. The interface is as follows.
Display temperature (Enabled); Channel Sequence (Disable).
System default parameters:
eLineTechnology.com