eLine Technology PRO3 User Manual - Manual (Page 63)

63
Ｎｅｔ ＤＶＲ
4.8.2 HDD Group
Note: You can choose the right channel record to specified HDD group. It can take you follow convenience:
1) Can make sure specified channel record to specified HDD.
2) According to channel data quantity size specifi the right HDD. Reasonably set each channel storage space.
You can select “HDD Group” sub-menu in “HDD Management”, the interface is the right figure above. System support maximum 4 HDD group.
l HDD Number: Set the right HDD belong to the right group;
l Record Channel: Set the right channel belong to the right group;
l Total Capacity: Display the total capacity of all HDD in the HDD group;
l Free Capacity: Display free capacity of all HDD in the HDD group;
l Record Time: Display the max time of record which current HDD group can storage.
Choose “SMART” option interface as the right:
You can check the HDD SN, firmware version, temperature, state of heath and other SMART values.
4.8.3 SMART
4.9 Information Inquiry
Check the DVR firmware version and log information by the menu “Main Menu” -> “Info. Inquiry”. The sub-menu have Sys Info. , Record State, Alarm State, Online State, Log Inquiry
and Input State as below:
eLineTechnology.com