eLine Technology PRO3 User Manual - Manual (Page 73)

73
Ｎｅｔ ＤＶＲ
Appendix 1 IE Operation Instructions
Notice: Please set firewall rank for low or medium, and surf software or net assistant software, etc. should be blocked or unloaded, otherwise the software may not run properly.
Please guarantee to install DirectX 9.0 of Microsoft and confirm the Internet Explorer edition is 6.0 version or above. All hardware driver version should upgrade to the latest.
1. LAN Configuration for IE Browse
Step1: “Ping” the host IP first to confirm if the DVR is connected, the interface is as “Figure 1”.
Step2: Type the host IP into windows IE and connect to the DVR. Input the address of the host to access the equipment in the IE browser (http://device host IP:81), and then enter to
connect, after a successful connection click “Download” button to download, and running control. Refresh the browser, enter your user name and password to login in the login box.
If login is successful, the interface will pop up as “Figure 2”.
Step3: Please refer to “Client user guide” for further operation.
Figure 1 Figure 2
eLineTechnology.com