eLine Technology PRO3 User Manual - Manual (Page 47)

47
Ｎｅｔ ＤＶＲ
l Full screen: When preview image have multi-channels, if system detect alarm, the alarm channel will full screen display.
l Alarm output deployment time: System default set alarm output deployment time is everday 00:00-23:59.
4.6.4 Other Alarms
Enter “Main Menu” -> “Alarm Setup” -> “Other Alarms” interface as below:
l Alarm type: HDD error, Video lost, Network disconnection, High temperature, Video mask. HDD error, Video lost and High temperature default enable alarm function. Network
disconnection and Video maks default disable alarm function.
l Alarm linkage: If the “Alarm output” button is blue color, means enable alarm output when there has alarm event. If is gray color mean disable alarm output. HDD error, Video lost,
High temperature and Video mask support email upload function.
Enter “Main Menu” -> “Alarm Setup” -> “Manual Alarm”, the interface is the right figure above:
If there has some emergency abnormal events, you can manual trigger the alarm to inform the related people.
Realization way: Left click mouse to select the alarm number which you want to alarm or you can select the “Select all” button. Then click “Triggered” button to open DVR alarm.
Can click “Clear” button to close the DVR alarm sound.
4.6.5 Manual Alarm
eLineTechnology.com