eLine Technology PRO3 User Manual - Manual (Page 44)

44
Ｕｓｅｒ Ｍａｎｕａｌ
Follow below steps to enter Schedule Record interface:
1. Select the corresponding channel No..
2. Deployment time: choose the record date for setting, can be everyday or a certain day (multiple
choices). Time range setting: choose the time range of record, can be set multiple range in one day,
the setting of time according to the time order. Select the date through the mouse left key then set
the time to take effect, drag the mouse left key to set the time range, also can be set by remote
controller or double click mouse (put the poniter of remote controller at the time bar and press the
enter key or double click the time bar), you can set 6 time range (note: the default time display is
multiples of 15).
3. Click “Save” to activate the settings, you can also duplicate the settings to other channels.
Enter “Motion detection” interface by “Main Menu” -> “Alarm Setup” -> “Motion” as below:
You can judge if the scene have any changes by checking the realtime record. If you want to record when there have someone or something moving in channel scene, you can set “Motion
Detection” to record. User can set motion alarm record time, deploy time, sensitivity, motion detection area and alarm output channel.
Motion detection operation steps:
Step1: Enter “Main Menu” -> “Record Setup” -> “Record para.” interface to set corresponding channel pre-record time and delay-record time.
Step2: Select the channel number which you want to motion record.
4.6 Alarm Setup
“Alarm Setup” interface is as right:
4.5.6 Schedule Record
4.6.1 Motion
eLineTechnology.com