eLine Technology PRO3 User Manual - Manual (Page 78)

78
Ｕｓｅｒ Ｍａｎｕａｌ
04: Why does my system restart after self-check?
04: 1.Check the hard disks if they are in FAT32 file format, if not, change to FAT32. 2.Check Color System setting in Record Parameter menu. In case this setting is PAL, while
present video input is in NTSC format, which will cause system restart. 3.Please unplug the network cable, to see whether DVRs run normally, since there are serious problems
of the network which may also cause the host to restart repeatedly.
05: Why my remoter doesn’t work?
05: 1.Please check if the IR indicator light on the front panel flashes when you make operations with the buttons. If not, please check whether the remote control has run out of
battery, or the remote control has been damaged. 2.Check if the front panel is in lock up status. If so, press Login/Lock button and input power password to unlock. 3.Please
check if the host software locks the operation. If yes, please input user name, password to login, so to make IR remoter control work.
06: Why system halts at some certain time?
06: In case system halts at some certain time, for example, around 7:30am, please check your electricity system. This problem is mostly happened in factories, when at around
7:30, all machines start and cause power supply in a short temporarily. Try to make the DVR not connect to the same circuit as the industrial machines.
(B) Display Problems
01: Why there is nothing displayed on the monitor or the display keeps shaking?
01: 1.Check if the power is on or not. If the power is on, the power light at the front panel should be on. 2.Check the display mode. It can display VGA/CVBS/HDMI at the same
time. Please check if you have connected video input. If not, VGA/CVBS/HDMI will all displaying nothing.
02: Why my DVR display images that seems to be interfered, and like water wave shape?
02: 1.Please check if the video cable has well connected. 2.Check if there are strong electricity current around the video cable. Please don’t put video cable together with
electricity cables to avoid interfering. 3.Please check if the DVR case is well grounded. Only connect the case to ground by the screw on the back panel, while no other points
connect to ground. 4.Please check camera, monitor and video cables if they are aging.
eLineTechnology.com