eLine Technology PRO3 User Manual - Manual (Page 31)

31
Ｎｅｔ ＤＶＲ
HDD
Management
HDD Group Set the HDD and record channel belong to different group, display the HDD total capacity, free capacity, record time.
SMART Query the HDD model, serial number, firmware version, temperature, health status and SMART attribution.
Information
Inquiry
System Information Query and display the device model, software version, SCM version, IP address, MAC address, language, resolution.
Record Status Display the record status of each channel (record type, image quality, definition, audio, Code rate).
Alarm Status
Display the alarm status of each channel (sensor alarm, motion alarm, video loss, video shield), HDD alarm, network
disconnect alarm, temperature alarm and alarm clear.
Online Status Display the device online information (online user, login IP, login time).
Log Inquiry Inquiry the system log, display the log quantity and backup log.
Input State Display the audio/video source type (video/audio status).
System
Maintenance
Quick Settings Quick set time, network setting, HDD information inquiry and format, local code stream and network stream, manual record.
User Management
1. Add new user, delete user/group;
2. Change local/remote user account and authority. Support remote user authorities: remote preview, parameter setup,
remote playback, remote backup, log inquiry, voice talk, remote upgrade, user binding IP and MAC address.
Reset To Default
To default setting: general setting, output setting, coding parameter, schedule record, alarm setting , network setting,
COM setting, timing restart, PTZ setting.
Upgrade Management FTP Upgrade, USB Upgrade.
Schedule Restart Enable system schedule function to set the restart time.
eLineTechnology.com