eLine Technology PRO3 User Manual - Manual (Page 65)

65
Ｎｅｔ ＤＶＲ
Alarm status interface as follows:
Display 4 kinds of alarm information of each channel: Sensor Alarm (Red mark), Motion Alarm (Yellow mark), Video lost (blue mark), Video Shield (Green mark). You can click the
“Clear” button to close alarm sound in DVR front panel or in IR remote controller. Also you can click the “Alarm Clear” icon in DVR interface status bar to close alarm sound.
Display the information which PC has login the DVR. It will display the username, IP of PC and login time, the interface is the right figure above:
Note: Our CMS software may affect the online information displaying. If CMS has add one DVR with the IP, even if you don’ t open the PC Terminal , the PS Service server will connect
DVR. Then it will shows the PS Service server IP address in the online state interface.
4.9.3 Alarm Status
4.9.4 Online status
eLineTechnology.com