Hach-Lange DR 3800 User Manual - Manual (Page 149)

149
Appendix D Thermal printer
To record all measured data on 4’’ paper an optional Thermal
Printer (see
Section 9 on page 131 ) can be connected.
1. Connect the Thermal printer to the instrument (see section 3.4
on page 13 ).
2. Press PC & Printer in the Instrument Setup.
Note: A list with information about the connections opens.
3. Highlight Printer.
4. Press Setup to display the Printer Setup screen.
5. Select Auto-Send: On to send all measured data automatically
to the Thermal printer.
Note: The option Auto-Send is not available for any other printer (e.g.
ink jet printer).