Hach-Lange DR 3800 User Manual - Manual (Page 50)

50
Standard Operations
4. Remove zero solution and insert sample cuvette/cell into the
cell compartment.
5. Press Read. The result will be displayed.
6. For data storage, see section 5.3.1 on page 35 .
5.4.10 Update/edit tests
General advices regarding the programming respectively updating
of program data.
For a manual test update and for a new programming of a test, see
section 5.4.10.1 and section 5.4.10.2 on page 51 .
Note: Only in very few cases does the revision of a test require the test
specifications to be updated.
For the updating and editing of Barcode Tests, see section
section 5.5.6 on page 56 .
5.4.10.1 Manual update of test data
When a test is selected the instrument automatically set the
measurement wavelength and factors.
Tests are continuously reviewed for simplified handling and to make
sure current legal requirements are followed. This can lead to a
change in the working procedure or an alteration to the factors. If
such an alteration is indicated on the test packaging, update the
instrument data according to the data supplied on the working
procedure inside the test packaging.
For updating from the Internet, see section 5.5.7 on page 61 .
1. Press Stored Programs in the Main Menu and select a
program.
2. Press Program Options and then Edit.