Hach-Lange DR 3800 User Manual - Manual (Page 80)

80
Advanced Operations
Table 11 Edit formula key descriptions
Screen Key Description
Abs/Variables
Press the Abs/Variables key to select, from the
displayed list, the required element of the defined
measuring sequence and therefore the corresponding
measurement wavelength, so that this can be taken into
account in the formula.
New Number Press New Number to enter a new factor or constant.
+–
÷
x
Press +–
÷
x, to enter a mathematical operation.
Select the operation and press OK to confirm.
The available choice of mathematical operations
depends on the defined formula.
This means that functions such as "( )" or "ln"/"log" etc.
are only active if a term in parentheses or the calculation
of a logarithm is mathematically permissible in the
defined formula (this also applies to the basic
mathematical operations).
The following mathematical operations are available:
• + (Addition)
• – (Subtraction)
• ÷ (Division)
• x (Multiplication)
• ^ (Exponent)
• Ln (Natural logarithm)
• Log (Common logarithm)