Hach-Lange DR 3800 User Manual - Manual (Page 25)

25
Standard Operations
5.2 Instrument Setup mode
1. Select Instrument Setup in the Main Menu.
A selection of functions appears in order to configure the functions
of the instrument.
5.2.1 Operator ID
Use this option to enter up to 30 sets of operator initials (up to five
characters each) into the instrument. This feature helps record
which operator measured each sample.
1. Press Operator ID in the Instrument Setup.
2. Press New to enter a new Operator ID.
3. Use the alphanumeric keypad to enter a new Operator ID.
4. Press OK to confirm.
Select one of the four preset color palett in the Select Color menu to
assign to the Operator ID.
5. Select a color category to highlight the color for the display
background.
Note: Press Cancel to select the default setting.
6. Press OK to confirm.