Hach-Lange DR 3800 User Manual - Manual (Page 62)

62
Standard Operations
5.5.8.1 Evaluation of barcode-readable appliaction with LCW 906
1. The instrument needs to display the Main Menu or the
Barcode Programs menu.
2. Insert the cuvette LCW 906.
3. Select the required application 906 from the displayed list and
press Start.
Note: Press Start Permanent if this application 906 is to apply to all
subsequent measurements.
To disable the function Start permanent:
Insert the cuvette LCW 906 and close the cell compartment. Press
Options>More>Permanent: On.
5.5.8.2 Edit/delete of barcode-readable appliaction
To edit a barcode-readable application:
1. Press Stored Programs in the Main Menu and select a
program.
a. Press Program Options and then Edit.
b. Insert the LCW 906 cuvette, press Options>More>Edit.
2. The Data list of the corresponding application will appear.
3. Highlight the corresponding line in the data overview and press
Edit.
General advices regarding the programming respectively updating
of program data, see
section 5.5.6 on page 56 and section 6.1.2 on
page 76 .