Hach-Lange DR 3800 User Manual - Manual (Page 53)

53
Standard Operations
5.5.1 Complete a barcode 13 mm test/vial
1. Insert the light shield in cell compartment #2.
2. Prepare the barcode 13 mm cuvette/vial in accordance with the
working procedure and insert the cuvette/vial in cell
compartment #1.
• When a coded cuvette/sample cell is placed in cell
compartment #1 (
Figure 10 ), the corresponding
measurement program is automatically activated in the
Main Menu.
• Otherwise, press Barcode Programs in the Main Menu.
and insert the blank or sample cuvette/vial (depending on
the working procedure) in cell compartment #1.
Note: For further information about the Help Guide (Information icon), see
Appendix B on page 143 .
The measurement is started automatically and the results are
displayed.
To evaluate other cuvette/vial tests and other parameters, insert the
prepared cuvette/vial into the cell compartment and read the result.
Note: The control bar displayed on the right of the screen shows the
relationship of the measurement result to the measuring range. The black
bar shows the measured result independently of any dilution factor that
was entered.