Hach-Lange DR 3800 User Manual - Manual (Page 61)

61
Standard Operations
5.5.7 Update from the internet
To obtain the software for the update from the Internet at
www.hach-lange.com:
1. Go to http://www.hach-lange.com
2. Select the country and go to Download>Software.
3. Enter DR 3800 in ”Search for documents“.
4. Locate the appropriate download and follow the prompts for
saving the file(s) to the USB memory stick ( Section 9 on page
131 ) or to the PC.
5. Unpack the ZIP file and save the files to the USB memory stick.
6. Press Instrument Update in the System Checks menu.
7. Connect the USB memory stick to the USB interface (type A)
on the instrument, see section 3.4 on page 13 .
8. Press OK. The link is established automatically and the
software is updated.
9. Press OK to return to the System Checks menu.
Note: When the instrument software has been updated, a prompt to restart
the instrument is displayed.
5.5.8 Program an own barcode-readable applications with LCW 906
LCW 906 empty cuvettes can be used to program a
barcode-readable applications.
Several user applications can be assigned to this program number.
Note: Use the program name to assign the barcode application to
LCW 906.
1. Press Stored Programs in the Main Menu. Press Program
Options and then New.
2. Use the alphanumeric keypad to enter the Program Number
906.
3. A data overview is displayed, including the specifications of the
test that is to be revised.
4. Highlight the corresponding line in the data overview and press
Edit.
For general advices on updating program data, see section 5.5.6
on page 56 and section 6.1.2 on page 76 .