Front panel setup keys – Laurel Electronics LAUREATE SERIES DPM User Manual
Page 10
-8-
8.
FRONT PANEL SETUP KEYS
Figure 8.1
ALARM 2 STATUS
INDICATOR
MENU KEY
The menu key steps through the various meter parameters that may be selected. These menu
items may be “locked out” from front panel selection by software and hardware.
PEAK DISPLAY KEY (DIGIT SELECT)
In the Operating Mode, pressing the Peak Display Key causes the peak value of the input
signal to be displayed. Pressing the key again returns the display to the present value. In the
Menu Mode , the Digit Select Key (Peak Display Key) is used to select input type and decimal
point or to select one of the five display digits for programming. In the main menu, pressing the
Digit Select Key causes the value or code that is stored for that menu item to be displayed and
the left hand digit flashes. Each time the key is pressed, the next digit to the right will flash. The
value of the flashing digit may be changed using the Value Select Key. In the Alarm Mode,
pressing the Digit Select Key causes the most significant digit of the displayed setpoint value
to flash. Digits are then selected the same as in the Menu Mode.
RESET KEY (VALUE SELECT)
In the Operating Mode, holding the Reset Key depressed and pressing any other key causes
a reset to occur. The Menu Key resets all meter functions, the Alarm Key resets any alarm
conditions and the Peak Display Key resets the peak value to present value. In the Menu Mode
or Alarm Mode, the Value Select Key ( Reset Key) sets the value of the flashing digit. Each
time the key is pressed, the value increases by one. Holding the key down causes the digit to
automatically step through the numbers.
ALARM KEY (REVERSE MENU)
In the Operating Mode, pressing the Alarm Key displays the setpoint of Alarm 1 and then
Alarm 2. These values may be changed using the Digit Select Key and the Value Select Key.
In the Menu Mode, pressing the Alarm Key steps the display backward through the menu.
MENU KEY
RESET KEY
( VALUE SELECT )
PEAK DISPLAY KEY
( DIGIT SELECT )
ALARM KEY
(REVERSE MENU)
ALARM 1 STATUS
INDICATOR